 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PLA140L Single Pole OptoMOS(R) Relays Load Voltage Load Current Max RON PLA140L 400 200 13 Units V mA Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Current Limiting, Surface Mount and Tape & Reel Versions Available Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * Automotive Description PLA140L is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented Optomos architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA140L also contains a built in load current limiting feature. This combined with a low on resistance and very high load current handling capabilities makes it suitable for a variety of high performance switching applications. Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified to: * BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 * BS EN 41003:1993 Certificate #: 7344 Ordering Information Part # PLA140L PLA140LS PLA140LSTR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Switching Characteristics of Normally Open (Form A) Devices Pin Configuration PLA140L Pinout AC/DC Configuration 1 2 3 6 5 4 CONTROL 10ms + Control - Control Do Not Use Load LOAD + 90% 10%+ TON 10%+ TOFF Do Not Use Load PLA140L Pinout AC/DC Configuration 1 2 3 6 5 4 + Control - Control Do Not Use Load Do Not Use Load DS-PLA140L-R4.0 www.clare.com 1 PLA140L Absolute Maximum Ratings (@ 25 C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 C +125 C +260 +220 C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C Electrical Characteristics Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Load current limit Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=200mA IL=350mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V IF=SmA, T=25c 50V; f=1MHz IL=200mA IF=5mA VR=5V Symbol VL IL IL IL RON RON ILEAK TON TOFF ICL COUT IF IF VF VR IR CI/O VI/O Min 240 5 0.4 0.9 3750 Typ 10 3 65 0.7 1.2 3 Max 400 200 350 500 13 4 1 5 3 380 50 1.4 5 10 Units V mA mA mA A ms ms mA pF mA mA V V A pF VRMS 2 www.clare.com Rev. 4.0 PLA140L PERFORMANCE DATA* 35 30 Device Count (N) PLA140L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C; IF = 5mADC) 35 30 Device Count (N) PLA140L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 200mADC; IF = 5mADC) PLA140L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 9.5 10.0 10.5 11.0 11.5 12.0 On-Resistance () 430 442 454 466 478 490 Blocking Voltage (V) PLA140L Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 200mADC) 25 20 15 10 5 0 1.5 2.1 2.7 3.3 3.9 4.5 Current (mA) Device Count (N) 25 PLA140L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C) (Load Current = 200mADC) 20 15 10 5 0 0.9 1.5 2.1 2.7 3.3 3.9 Current (mA) 25 20 15 10 5 0 PLA140L Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 200mADC; IF = 5mADC) Device Count (N) Device Count (N) 0.39 0.65 0.91 1.17 1.43 1.69 Turn-On (ms) PLA140L Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 200mADC; IF = 5mADC) 25 Load Current (mA) 20 15 10 5 0 0.18 0.30 0.42 0.54 0.66 0.78 Turn-Off (ms) PLA140L Typical Load Current vs. Temperature 300 250 Leakage (A) 200 150 100 50 -40 -20 0 20 40 60 80 100 120 Temperature (C) 0.12 0.10 0.08 0.06 0.04 0.02 0 -40 PLA140L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) IF =20mA IF =10mA IF =5mA -20 0 20 40 60 80 100 Temperature (C) PLA140L Typical Blocking Voltage vs. Temperature 485 Blocking Voltage (VRMS) 480 475 470 465 460 455 450 445 -40 -20 0 20 40 60 80 100 Temperature (C) 0 -40 Turn-On (ms) 2.00 1.50 1.00 2.50 PLA140L Typical Turn-On vs. Temperature (Load Current = 200mADC) 0.70 PLA140L Typical Turn-Off vs. Temperature (Load Current = 200mADC) 0.60 Turn-Off (ms) 0.50 0.40 0.30 0.20 0.10 0 -40 -20 0 20 40 60 80 100 5mA IF =5mA IF =10mA 0.50 IF =20mA -20 0 20 40 60 80 100 Temperature (C) Temperature (C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4.0 www.clare.com 3 PLA140L PERFORMANCE DATA* PLA140L Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (C) Turn-On (ms) PLA140L Typical Turn-On vs. LED Forward Current (Load Current = 200mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PLA140L Typical Turn-Off vs. LED Forward Current (Load Current = 200mADC) 0.5 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA 20 18 16 14 12 10 8 6 4 2 0 PLA140L Typical On-Resistance vs. Temperature (Load Current = 200mADC; IF = 5mADC) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 PLA140L Typical IF for Switch Operation vs. Temperature (Load Current = 200mADC) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 Turn-Off (ms) PLA140L Typical IF for Switch Dropout vs. Temperature (Load Current = 200mADC) On-Resistance () LED Current (mA) -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 LED Current (mA) -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Temperature (C) 250 200 150 100 50 0 -50 -100 -150 -200 -250 -4.0 -3.0 PLA140L Typical Load Current vs. Load Voltage (Ambient Temperature = 25C; IF = 5mADC) PLA140L Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s Load Current (mA) -2.0 -1.0 0 1.0 2.0 3.0 4.0 Load Voltage (V) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4.0 PLA140L MECHANICAL DIMENSIONS 6Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 6.350 .127 (.250 .005) 2.540 .127 (.100 .005) 7.620 .127 (.300 .005) 5.080 .127 (.200 .005) 6Pin DIP Surface Mount ("S" Suffix) PC Board Pattern (Top View) 2.540 .127 (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) 1.499 .127 (.059 .005) Tape and Reel Packaging for 6 Pin Power DIP Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 2.007 - .102 1.498 - .102 3.987 - .102 (.079 - .004) (.059 - .004) (.157 - .004) 6.731 MAX. 1.753 - .102 (.265) (.069 - .004) .406 MAX. (.016) 7.493 - .102 (.295 - .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 - .305 (.630 - .012) 10.300 (.405) Embossed Carrier Top Cover Tape .050R TYP. 11.989 - .102 (.472 - .004) 10.300 - .102 (.405 - .004) 1.549 - .102 (.061 - .004) Embossment User Direction of Feed Dimensions mm (inches) Rev. 4.0 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare 603 Apache Court Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA140L-R4.0 (c)Copyright 2001, Clare, Inc. All rights reserved. Printed in USA. 8/13/01 |
Price & Availability of PLA140LS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |